manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 109

107

3

Comfort

308_EN_CHAP03_CONFORT_ED02-2013

       Rear  screen  demist  -  defrost 

  Switching  on 

  Switching  off 

   Press this button to demist/

defrost the rear screen and 
(depending on version) the door 
mirrors. The indicator lamp 
associated with the button 
comes  on.   

 The demisting/defrosting switches off automatically 
to prevent an excessive consumption of current. 

The rear screen demist - defrost 
can only operate when the engine is 
running.  

  Switch off the heating of the rear screen 
and door mirrors as soon as you judge it 
possible, as reducing the consumption 
of electrical current reduces fuel 
consumption.   

   It is possible to stop the 

demisting/defrosting operation 
before it is switched off 
automatically by pressing the 
button again. The indicator 
lamp associated with the button 
switches  off.  

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands