PEUGEOT 308 Handbook Download Page 23

Page: 23 / 400

Monitoring

308_EN_CHAP01_CONTROLE DE MARCHE_ED02-2013

Warning / indicator lamp State

Cause

Action / Observations

Anti-lock

Braking System

(ABS)

fixed.

The anti-lock braking system has a
fault.

The vehicle retains conventional braking.
Drive carefully at reduced speed and contact a

PEUGEOT dealer or a qualified workshop without

delay.

Dynamic

stability control

(DSC/ASR)

flashing.

The DSC/ASR regulation is
operating.

The system optimises traction and improves the
directional stability of the vehicle in the event of loss of
grip or trajectory.

fixed.

The DSC/ASR system has a fault.

Have it checked by a PEUGEOT dealer or a qualified

workshop.

Braking

fixed.

The braking system fluid level has
dropped significantly.

You must stop as soon as it is safe to do so.
Top up with brake fluid listed by PEUGEOT.
If the problem persists, have the system checked by a

PEUGEOT dealer or a qualified workshop.

fixed, associated
with the ABS warning
lamp.

The electronic brake force distribution
(EBFD) system has a fault.

You must stop as soon as it is safe to do so.

Have it checked by a PEUGEOT dealer or a qualified

workshop.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands