manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 134

132

Driving

308_EN_CHAP04_CONDUITE_ED02-2013

            Memorising speeds 

  Memorisation 

 This function allows speeds to be saved, which can then be offered to set the two systems: the speed limiter (to limit the speed of the vehicle) or the 
cruise control (for a vehicle cruising speed). 
 You can memorise up to six speed settings for each of the two systems. By default, some speeds are already memorised. 

   Select the " 

Speed settings

 ".   

  For safety reasons, the driver must 
carry out these operations when 
stationary.  

   Select the system for which you want to 

memorise  speeds:   

   Go to the " 

Driving assistance"

   menu.   

   Enter the new value using the numerical 

keypad and confirm. 

   Confirm to save the modification and quit 

the  menu.   

    ●   speed limiter or   

    ●   cruise control.   

   Choose the speed setting you want to 

modify.   

  This button allows you return to the 
factory  settings.   

Touch  screen  

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands