manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 130

128

Driving

308_EN_CHAP04_CONDUITE_ED02-2013

      Dynamic  function  

  In sport mode (with an automatic gearbox), this 
function conditions: 
   -   the visual ambience, with specific back-

lighting for the instrument panel, 

  -   the acoustic ambience of the engine, 
  -   power assistance for the steering, 
  -  

acceleration, 

  -  

the  automatic  gearbox, 

  -   information to the driver in the instrument 

panel on dynamic settings.   

  This function is only available when 
Park Assist is not selected and snow 
mode in the automatic gearbox is not 
selected. 
 If Park Assist is switched on, this 
automatically deactivates the function.  

  Activation  

   Press the end of the wiper control stalk to 

display in the instrument panel the different 
information on dynamic settings.   

  The telemetry data (longitudinal and 
lateral acceleration, power produced, 
turbocharger pressure, ...) are given as 
an  indication  only.   

   Press nd hold the button until the back-

lighting in the instrument panel changes.  

 The LED in the button stays on.  

  Display  

   Press repeatedly to go from one screen to 

another.   

  If the LED flashes, activation is not possible 
(for example if Park Assist or snow mode is 
selected) and so the back-lighting returns 
to its normal mode. 
 If the LED continues flashing for a long 
time, contact a PEUGEOT dealer or a 

qualified workshop.  

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands