PEUGEOT 308 Handbook Download Page 332

Page: 332 / 400

330

308_EN_CHAP10C_SMEGPLUS_ED02-2013

Traffic information

Select "

Trafﬁ c messages

Press on

Navigation

to display the primary

page then go to the secondary page.

Select the message from the list offered.

Select the magnifying glasses to have the

information spoken.

Set the "

On the route

", "

Around

", "

Near

destination

" ﬁ lters to ﬁ ne-tune the list.

Press again to remove the ﬁ lter.

Select "

Settings

Select:

Warn of new messages

Speak messages

Then enter the ﬁ lter radius.

Press on

Navigation

to display the primary

page then go to the secondary page.

Display of messages

Setting ﬁ lters

We recommend a ﬁ lter radius of:

- 12 miles (20 km) in urban areas,

30 miles (50 km) on motorways.

TMC (Trafﬁ c Message Channel) messages contain information on

trafﬁ c and weather conditions, received in real time and transmitted

to the driver in the form of audible announcements and symbols on

the navigation map.

Select "

Conﬁ rm

TRAFFIC

Select "

Info option

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands