manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 53

51

2

Access

308_EN_CHAP02_OUVERTURES_ED02-2013

 Back-up  control 

  Driver's  door 

   Insert the key in the lock to lock or unlock 

the  door.  

 If your vehicle has an alarm, it will not be 
activated and deactivated on locking and 
unlocking the vehicle. 
 Opening a door will trigger the alarm, which 
can be stopped by switching on the ignition.  

  Passenger  doors 

   On the rear doors, check that the child lock 

is not on. 

   Insert the integral key into the latch on the 

edge of the door and turn it an eighth of a 
turn to the right, for the right hand side and 
to the left for the left hand side. 

   Close the doors and check from the 

outside that they have locked correctly.   

 For mechanically locking and unlocking the 
doors in the event of a fault with the central 
locking system or a battery failure.  

  If your vehicle has an alarm, it will not 
be activated and deactivated on locking 
and unlocking the vehicle. 
 Opening a door will trigger the alarm, 
which can be stopped by switching on 
the  ignition.   

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands