PEUGEOT 308 Handbook Download Page 360

Page: 360 / 400

308_EN_CHAP10C_SMEGPLUS_ED02-2013

FREQUENTLY ASKED QUESTIONS

358

QUESTION

ANSWER

SOLUTION

Navigation, guidance

The route calculation is

not successful.

The guidance criteria may conﬂ ict with the current location (exclusion of

toll roads on a toll motorway).

Check the guidance criteria on the Navigation

Menu, "Guidance options"\ "Deﬁ ne calculation

criteria".

I am unable to enter my

post code.

The system only accepts post codes of up to 5 characters.

The POIs do not appear. The POIs have not been selected.

Select the POIs in the list of POIs.

The risk areas audible

warning does not work.

The audible warning is not active.

Activate audible warnings in the Guidance options

menu, "Navigation - guidance", "Set parameters

for risk areas".

The system does not

suggest a detour around

an incident on the route.

The guidance criteria do not take account of TMC messages.

Select the "Trafﬁ c info" function in the list of

guidance criteria.

I receive a Risk area alert

which is not on my route.

Other than guidance, the system announces all Risk areas positioned in a

cone located in front of the vehicle. It may provide an alert for a Risk area

located on nearby or parallel roads.

Zoom in on the map to view the exact position of

the Risk area. Select "On the route" to no longer

receive alerts other than guidance or to reduce the

time for the announcement.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands