manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 195

193

6

Safety

308_EN_CHAP06_SECURITE_ED02-2013

  Electronic Stability Control (ESC) incorporating 
the following systems: 
   -   the anti-lock braking system (ABS) and the 

electronic brake force distribution (EBFD), 

  -  

the  emergency  braking  assistance, 

  -   the anti-slip regulation (ASR) or traction 

control, 

  -  

the  dynamic  stability  control  (DSC).    

         Electronic stability control (ESC)  

  Definitions 

  Anti-lock braking system (ABS) 

and electronic brake force 

distribution (EBFD) 

 This system improves the stability and 
manoeuvrability of your vehicle when braking 
and provides improved control in corners, in 
particular on poor or slippery road surfaces. 
 The ABS prevents wheel lock in the event of 
emergency braking. 
 The electronic brake force distribution system 
manages the braking pressure wheel by wheel.  

  Emergency  braking  assistance 

 In an emergency, this system enables you to 
reach the optimum braking pressure more 

quickly and therefore reduce the stopping 

distance. 
 It is triggered according to the speed at which 
the brake pedal is pressed. This is felt by a 
reduction in the resistance of the pedal and an 
increase in the effectiveness of the braking.  

  Anti-slip  regulation  (ASR) 

 The ASR system (also known as Traction 
Control) optimises traction in order to limit 
wheel slip by acting on the brakes of the driving 
wheels and on the engine. It also improves 
the directional stability of the vehicle on 
acceleration.  

  Dynamic stability control (DSC) 

 If there is a difference between the path 

followed by the vehicle and that required by 

the driver, the DSC monitors each wheel and 
automatically acts on the brake of one or more 
wheels and on the engine to return the vehicle 

to the required path, within the limits of the laws 

of  physics.   

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands