PEUGEOT 308 Handbook Download Page 143

Page: 143 / 400

141

Driving

308_EN_CHAP04_CONDUITE_ED02-2013

The controls for this system are grouped
together on the steering wheel.

Cruise control mode selection wheel.

Button for reducing the cruise value setting

or for setting the cruise value on the fly.

Button for increasing the cruise value setting

or for setting the cruise value on the fly.

Button for pausing / resuming the cruise control.

Button for displaying the list of memorised

speeds and for adjusting the inter-vehicle
time.

Steering mounted controls



Turn the wheel

to the "

CRUISE

" position:

cruise control mode is selected, but not
started (Pause).



Press one of the buttons

: the current

speed of your vehicle becomes the cruise
speed setting (set on the fly).

The cruise control is activated (ON).
The inter-vehicle time is set at 2 seconds.

Switching on

The information is grouped together in the
instrument panel.

Indication of cruise control pause/resume.

Indication of selection of cruise control

mode,

vehicle speed adjustment phase.

Cruise speed setting.

Displays in the instrument panel

For more information on the list of
memorised speeds, refer to the
"Memorising speeds" section.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands