PEUGEOT 308 Handbook Download Page 32

Page: 32 / 400

Monitoring

308_EN_CHAP01_CONTROLE DE MARCHE_ED02-2013

Distance recorders

The total and trip distances are displayed for
thirty seconds when the ignition is switched off,

when the driver's door is opened and when the

vehicle is locked or unlocked.

To conform to legislation in the country
you are crossing, change the units
of distance (miles or km) via the
configuration menu.

Total distance recorder

System which measures the total distance
travelled by the vehicle since its first
registration.

Trip distance recorder

System which measures a distance travelled
during a day or other period since it was reset
to zero by the driver.



With the ignition on, press the button until

zeros appear.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands