PEUGEOT 308 Handbook Download Page 311

Page: 311 / 400

309

308_EN_CHAP10C_SMEGPLUS_ED02-2013

RADIO

If "DAB / FM auto tracking" is activated, there is a difference of a

few seconds when the system switches to "FM" analogue radio with

sometimes a variation in volume.

When the digital signal is restored, the system automatically

changes back to "DAB".

Select change of source.

Press on

Media

to display the primary page.

Select "

DAB Radio

Select "

List

" in the primary page.

Select "

Radio list

" in the secondary page.

Select the radio station from the list offered.

Digital radio provides higher quality reception and also the

graphical display of current information on the radio station being

listened to. Select "List" in the primary page.

The range of multiplexes available is displayed in alphabetical

order.

Press

Media

to display the primary page then

press on the secondary page.

Select "

Settings

Select "

RADIO

Select "

Digital/FM

auto

tracking

" then

Conﬁ rm

"DAB" does not cover 100% of the territory.

When the digital radio signal is weak, "DAB / FM auto tracking"

allows you to continue listening to the same station, by

automatically switching to the corresponding "FM" analogue

station (if there is one).

If the "DAB" station being listened to is not available on "FM" ("

DAB/

" option greyed out), or "DAB / FM auto tracking" is not activated,

the sound will cut out while the digital signal is too weak.

Digital radio - DAB / FM auto tracking

DAB (Digital Audio Broadcasting) Digital radio

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands