manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 236

234

Practical information

308_EN_CHAP07_INFO PRATIQUES_ED02-2013

     Snow  chains 

  In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle 
when braking. 

  The snow chains must be fitted only 
to the front wheels. They must never 
be fitted to "space-saver" type spare 
wheels.  

  Take account of the legislation in force 
in your country on the use of snow 
chains and the maximum running speed 
authorised.  

  Avoid driving on roads that have been 
cleared of snow, to avoid damaging 

your vehicle's tyres and the road 

surface. It is recommended that before 
you leave, you practise fitting the snow 
chains on a level and dry surface. If 
your vehicle is fitted with alloy wheels, 
check that no part of the chain or its 
fixings is in contact with the wheel rim.   

Use only the chains designed to be fitted to the 
type of wheel fitted to your vehicle: 

  You can also use non-slip tyre covers. 
 For more information on snow chains, contact a 

PEUGEOT dealer or a qualified workshop.   

  Advice  on  installation 

   If you have to fit the chains during a 

journey, stop the vehicle on a flat surface 
on the side of the road. 

   Apply the parking brake and position any 

wheel chocks to prevent movement of your 
vehicle. 

   Fit the chains following the instructions 

provided by the manufacturer. 

   Move off gently and drive for a few 

moments, without exceeding 30 mph 
(50 km/h). 

   Stop your vehicle and check that the snow 

chains are correctly tightened.   

  Original 

tyre  size  

  Type  of  chain.  

 195/65  R15 

 9 mm links 

 205/55  R16 

 225/45  R17 

 225/40  R18 

 K-Summit  K23 

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands