manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 16

14

Monitoring

308_EN_CHAP01_CONTROLE DE MARCHE_ED02-2013

Operation indicator lamps 

 If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation.   

Warning / indicator lamp State

Cause

Action / Observations

Left-hand 

direction indicatorrr

  flashing  with  buzzer.  

 The lighting stalk is pushed down. 

Right-hand 

direction indicator

  flashing  with  buzzer.  

 The lighting stalk is pushed up. 

Sidelamps

  fixed.  

 The lighting stalk is in the 
"Sidelamps" position. 

Dipped beam 

headlamps

  fixed.  

 The lighting stalk is in the "Dipped 
beam headlamps" position. 

Main beam 

headlamps

  fixed.  

 The lighting stalk is pulled towards 
you. 

 Pull the stalk to return to dipped beam headlamps. 

Front foglamps

  fixed.  

 The front foglamps are switched on. 

 Turn the ring on the stalk rearwards twice to switch off 
the front foglamps. 

  For more information on the lighting controls, refer to the corresponding section.  

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands