PEUGEOT 308 Handbook Download Page 36

Page: 36 / 400

Monitoring

308_EN_CHAP01_CONTROLE DE MARCHE_ED02-2013

Trip computer

Information display in the

touch screen

Permanent display:



Select the "

Driving assistance

" menu.

The trip computer information is displayed in
the primary page of the menu.



Press one of the buttons to display the

desired tab.

The current instantaneous fuel
consumption tab with:
-

the range,

the current fuel consumption,

the Stop & Start time counter.

The trip

"1"

tab with:

the distance travelled.

the average fuel consumption,

the average speed,

for the first trip.

The trip

"2"

tab with:

the distance travelled.

the average fuel consumption,

the average speed,

for the second trip.

Trip reset



When the desired trip is displayed, press

the reset button or on the end of the wiper
control stalk.

Trips

"1"

and

"2"

are independent but their use

is identical.
For example, trip

"1"

can be used for daily

figures, and trip

"2"

for monthly figures.

The information is accessible in the "

Driving assistance

" menu.

Temporary display in a new window:



Press the end of the wiper control stalk for

access to the information and display the
different tabs.

Touch screen

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands