manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 289

287

9

Technical data

308_EN_CHAP09_CARACTERISTIQUES TECHNIQUES_ED02-2013

                        

Identifi cation markings 

 Various visible markings for the identification of your vehicle.  

A.

    

Vehicle Identification Number (VIN) 

under the bonnet.

     

 

This number is engraved on the chassis 
near the right hand front wheel arch. 

  The tyre pressures must be checked 
when the tyres are cold, at least once 
a  month.  

  If the tyre pressures are too low, this 
increases  fuel  consumption.   

B.

    

Vehicle Identification Number (VIN) on 

the windscreen lower cross member.

     

 

This number is indicated on a self-
adhesive label which is visible through the 
windscreen. 

C.

    

Manufacturer's label.

     

 

This self-destroying label affixed to 

the centre pillar, right or left hand side, 

contains the following information. 

   -   the manufacturer's name, 

  -   the European whole vehicle type 

approval number, 

  -   the vehicle identification number (VIN), 

  -   the maximum authorised weight (gross 

vehicle weight), 

  -   the maximum authorised weight with 

trailer (gross train weight), 

  -   the maximum front axle weight, 

  -   the  maximum  rear  axle  weight.  

D.

    

Tyre/paint label.

     

 

This label, affixed to the centre pillar, on 

the driver's side, contains the following 

information. 
   -   the tyre inflation pressures with and 

without load, 

  -   the tyre sizes (including the tyre load 

index and speed rating), 

  -   the inflation pressure for the spare 

wheel, 

  -   the  paint  colour  code.    

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands