PEUGEOT 308 Handbook Download Page 265

Page: 265 / 400

263

Practical information

308_EN_CHAP07_INFO PRATIQUES_ED02-2013

Do not fit an accessory carrier to the
tailgate.

Bicycle / accessory

carrier

Recommendations

- For safety reasons and to avoid damaging

the roof, it is essential to use the transverse
bars listed for your vehicle.

- Distribute the load evenly, avoiding

overloading on one side.

- Arrange the heaviest part of the load as

close as possible to the roof.

- Anchor the load securely and fit a warning

flag if part of it overhangs the vehicle.

- Drive gently, as the vehicle will be more

susceptible to the effects of side winds
(vehicle stability may be affected).

- Remove the roof bars as soon as they are

no longer needed.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands