PEUGEOT 308 Handbook Download Page 349

Page: 349 / 400

308_EN_CHAP10C_SMEGPLUS_ED02-2013

PEUGEOT CONNECT APPS

These applications use vehicle

data such as the current speed,

mileage, remaining fuel range

or even GPS position to provide

pertinent information.

Connect the "PEUGEOT CONNECT APPS" key to the USB port

located in the glove box.

The "MyPeugeot" application

is a link between the user, the

manufacturer and its dealer

network.

It allows the customer to know

everything about their vehicle:

servicing plan, accessory range,

service contracts taken out, ...

It also makes possible the sending

of the vehicle's mileage to the

"MyPeugeot" site, or to identify a

dealer.

"PEUGEOT CONNECT APPS" is a service providing driving aid applications in real time, that gives access to useful information such as the

state of the trafﬁ c, danger zones, fuel prices, the availability of parking places, tourist sites, weather conditions, correct addresses…

It includes access to the mobile network associated with the use of these applications. "PEUGEOT CONNECT APPS" is a service available

under subscription contract from PEUGEOT dealers, depending on country and the type of touch screen, both before and after delivery of a

new vehicle.

For safety reasons, some functions can only be used when

stationary.

Press the "Connected services" menu to display the applications.

347

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands