manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 55

53

2

Access

308_EN_CHAP02_OUVERTURES_ED02-2013

                     "Keyless Entry and Starting" with remote control 

  Complete  unlocking 

  Selective  unlocking 

 System which permits central unlocking or 
locking of the vehicle using the lock barrel or 
from a distance. It is also used to locate and 
start the vehicle, as well as providing protection 
against  theft.   

  Complete unlocking is activated by default.  

  Unlocking is confirmed by rapid 
flashing of the direction indicators for 
two seconds. 
 At the same time, depending on 
version, the door mirrors unfold. And 
if your vehicle has an alarm, it is 
deactivated.   

   To unlock only the driver's door, 

press the open padlock once. 

   Press the open padlock to unlock 

the  vehicle.    

   To unlock the other doors and the boot, 

press the open padlock again.   

 This setting is done in the  

"Driving 

assistance"

  menu, then  

"Vehicle settings"

and  

"Vehicle access"

 . 

  Use this button for access to 
additional  information.  

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands