manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 173

171

5

Visibility

308_EN_CHAP05_VISIBILITE_ED02-2013

 The folding and unfolding of the door 
mirrors using the remote control can be 
deactivated by a PEUGEOT dealer or a 

qualified workshop.  

   From outside: unlock the vehicle using the 

electronic key or the Keyless Entry and 
Starting system. 

   From inside: with the ignition on, pull the 

control  

A

  in the central position rearwards.  

  Unfolding 

   Folding 

   From outside: lock the vehicle using the 

electronic key or the Keyless Entry and 
Starting system. 

   From inside: with the ignition on, pull the 

control  

A

  in the central position rearwards.   

  If the mirrors are folded using control  

A

 , 

they will not unfold when the vehicle is 
unlocked. Pull again on control  

A

 .  

  If necessary, it is possible to fold the mirrors 
manually.   

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands