PEUGEOT 308 Handbook Download Page 94

Page: 94 / 400

Comfort

308_EN_CHAP03_CONFORT_ED02-2013

Luggage cover, roller blind (SW)

To remove

Storage



Remove the roller guide from the rails in

the boot pillars.



Release the roller blind, it reels in

automatically.



Place a hand on the left

under

the luggage

under

cover.



Turn the end of the reel towards the front

(clockwise) to release it.



Repeat the operation on the right (anti-

clockwise).

A cut-out in the floor well, under the boot
carpet, allows the luggage cover to be stowed
diagonally.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands