PEUGEOT 308 Handbook Download Page 198

Page: 198 / 400

196

Safety

308_EN_CHAP06_SECURITE_ED02-2013

Seat belts

Front seat belts

Rear seat belts

The rear seats are each fitted with a seat belt,
three-point anchorages with inertia reel and
force limiter (except for the centre rear seat).

Fastening



Pull the strap, then insert the tongue in the

buckle.



Check that the seat belt is fastened

correctly by pulling the strap.

Unfastening



Press the red button on the buckle.



Guide the seat belt as it reels in.

The front seat belts are fitted with a

pretensioning and force limiting system.

This system improves safety in the front

seats in the event of a front or side impact.

Depending on the severity of the impact, the

pretensioning system instantly tightens the seat

belts against the body of the occupants.

The pretensioning seat belts are active when

the ignition is on.

The force limiter reduces the pressure of the

seat belt on the chest of the occupant, so

improving their protection.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands