manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 207

205

6

Safety

308_EN_CHAP06_SECURITE_ED02-2013

         Child  seat  at  the  rear 

  "Rearward  facing" 

  When a "rearward facing" child seat is installed 

on a rear passenger seat

 , move the vehicle's 

front seat forwards and straighten the backrest 
so that the "rearward facing" child seat does 

not touch the vehicle's front seat.   

  "Forward  facing" 

  When a "forward facing" child seat is installed 

on a rear passenger seat

 , move the vehicle's 

front seat forwards and straighten the backrest 
so that the legs of the child in the "forward 

facing" child seat do not touch the vehicle's 

front  seat.  

  Centre  rear  seat 

  A child seat with a support leg must never be 
installed on the  

centre rear passenger seat

 .   

  Ensure that the seat belt is correctly 
tensioned. 
 For child seats with a support leg, 
ensure that this is in firm contact with 
the floor. If necessary, adjust the front 
seat of the vehicle.   

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands