manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 214

212

Safety

308_EN_CHAP06_SECURITE_ED02-2013

U

 :  seat suitable for the installation of a child 

seat secured using the seat belt and 
universally approved "rearward facing" and/
or "forward facing". 

U(R)

 :  as for  

U

 , the vehicle seat must be 

adjusted to the lowest position with 
11 operations of the seat height adjuster 
and intermediate longitudinal position. 

X

 :  seat not suitable for the installation of a child 

seat of the weight group indicated.  

  Remove and stow the head restraint 
before fitting a child seat with a 
backrest to a passenger seat. 
 Refit the head restraint when the child 
seat  is  removed.   

  (a)  universal child seat: child seat which can be 

installed in all vehicles using the seat belt. 

 (b)  group 0: from birth to 10 kg. Infant car seats 

and "car cots" cannot be installed on the 
front passenger seat. 

 (c)  consult the legislation in force in your 

country before installing your child on this 
seat. 

 (d)  to install a child seat on a rear seat, 

rearward or forward facing, move the front 
seat forward, then straighten the backrest to 
allow enough room for the child seat and the 

child's legs. 

 (1)  a child seat with support leg must never be 

installed on the centre rear passenger seat.  

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands