PEUGEOT 308, Handbook

Page: 283 / 400

281
8
Checks
308_EN_CHAP08_VERIFICATIONS_ED02-2013
The brake fluid level must be
between the marking "
A " (MAX A A
located on the remote reservoir) and
the marking "
B
" (MIN located on the
main reservoir). If it is not, check the
brake pad wear.
Brake fluid level
Changing the fl uid
Refer to the warranty and maintenance record
for details of the interval for this operation.
Fluid specifi cation
The brake fluid must conform to the
manufacturer's recommendations.
Coolant level
The coolant level should be close
to the "MAX" mark but should never
exceed it.
In addition, as the cooling system is
pressurised, wait at least one hour after
switching off the engine before carrying out any
work.
To avoid any risk of scalding, unscrew the cap
by two turns to allow the pressure to drop.
When the pressure has dropped, remove the
cap and top up the level.
Changing the coolant
The coolant does not have to be replaced at
routine services.
Fluid specifi cation
The coolant must conform to the
manufacturer's recommendations.
The cooling fan may start after switching
off the engine: take care with articles and
clothing that might become caught by the
fan blades.
When the engine is warm, the temperature of
the coolant is regulated by the fan.