manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 59

57

2

Access

308_EN_CHAP02_OUVERTURES_ED02-2013

Deadlocking 

  Deadlocking renders the exterior and 
interior door controls inoperative. 
 It also deactivates the manual central 
control button. 
 Therefore, never leave anyone inside 
the vehicle when it is deadlocked.  

  Using the remote control 

   Press the closed padlock to lock 

the vehicle completely.  

 

Maintain pressure with your 
finger for more than two seconds 
to close the windows. 

  With the Keyless Entry and 

Starting system 

 By the doors: 

   With the electronic key in the recognition 

zone  

A

 , press a finger on the door handle 

(at the markings) to lock the vehicle. 

   Within five seconds, press the door handle 

again to deadlock the vehicle.    

  Ensure that no one is preventing the 
correct closing of the windows. 
 Be aware of children when operating 
the  windows.  

   Press the closed padlock again within 

five seconds to deadlock the vehicle.   

         Accumulations  (water,  dust,  grime, 
salt...) on the inner surface if the door 
handle may affect detection. 
 If cleaning the inner surface of the door 
handle using a cloth does not restore 
detection, contact a PEUGEOT dealer 

or a qualified workshop. 

 A sudden splash of water (stream of 
water, high pressure jet washer, …) may 
be identified by the system as the desire 
to open the vehicle.   

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands