manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 203

201

6

Safety

308_EN_CHAP06_SECURITE_ED02-2013

 If this warning lamp flashes, contact 

a PEUGEOT dealer or a qualified 
workshop. The passenger's front 

airbag may no longer be deployed in 
the event of a serious impact.  

  Operating  fault 

 If this warning lamp comes on in the 
instrument panel, accompanied by an 
audible warning and a message, contact 

a PEUGEOT dealer or a qualified 

workshop to have the system checked. 
The airbags may no longer be deployed 
in the event of a serious impact. 

  In the event of a fault, identified by at 
least one of the two airbag warning 
lamps, do not install a child seat or seat 
an adult on the front passenger seat. 
 Have it checked by a PEUGEOT dealer 

or qualified workshop.   

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands