PEUGEOT 308 Handbook Download Page 329

Page: 329 / 400

327

308_EN_CHAP10C_SMEGPLUS_ED02-2013

These functions are only available if Risk Areas have been

downloaded and installed on the system.

Select "

Settings

Select "

Alert conﬁ g.

Risk area / Danger zone alert settings

It is then possible to activate Risk Areas alerts then:

"Audible warning"

"Alert only when navigating"

"Alert only for overspeed"

"Display speed limits"

- Timing: the choice of timing allows the time before giving a Risk

Area alert to be deﬁ ned.

Select "

Conﬁ rm

Press on

Navigation

to display the primary

page then go to the secondary page.

NAVIGATION - GUIDANCE

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Brands by name

Popular brands