manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 140

138

Driving

308_EN_CHAP04_CONDUITE_ED02-2013

  Flashing of the dashes indicates a fault with the 
cruise control. 
 Have it checked by a PEUGEOT dealer or a 

qualified workshop.  

  Operating  fault 

  Exceeding  the  programmed 

speed 

  Switching  off 

  When the cruise control is switched on, 
be careful if you maintain the pressure 
on one of the programmed speed 
changing buttons: this may result in a 
very rapid change in the speed of your 
vehicle. 
 Do not use the cruise control on 
slippery roads or in heavy traffic. 
 On a steep descent, the cruise control 
will not be able to prevent the vehicle 
from exceeding the programmed speed. 
 On steep climbs or when towing, the 
programmed speed may not be reached 
or maintained. 
 The use of mats not approved by 
PEUGEOT may interfere with the 
operation of the cruise control. 
 To avoid any risk of jamming of the 
pedals: 
   -   ensure that the mat is positioned 

correctly, 

  -   never fit one mat on top of another.    

  If the programmed speed is exceeded, the 
displayed speed flashes. 
 Once the vehicle returns to the programmed 
speed, the display becomes steady again.   

   Turn wheel  

1

  to the  

"0"

   position.  

 

The display of information related to the 
cruise  control  disappears.    

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands