Parker PAC, Installation Manual, Page: 99 / 197

Analog Voltage Values
Module Control
The Module provides you with various operational options. To set up the Module, choose the options as
appropriate and accept by setting control bit "SetOptions" to a rising edge. The Module will confirm by
returning "OptionsSet".
There are various "Module error" bits that the Module uses to indicate errors. The states of the error bits
are retained and also used for error indication by the "IO" LED. To reset the error bits, set control bit
"ResetError" to a rising edge.
Variable Data type Explanation
SetOptions BOOL Rising edge

accepts Module options
ResetError BOOL Rising edge

acknowledges error
Measuring Variable Value
Volt
Bipolar Unipolar
Decimal Hexadecimal Decimal Hexadecimal
-10 32768 16#8000
-9 36044 16#8CCC
-8 39321 16#9999
-7 42598 16#A666
-6 45875 16#B333
-5 49152 16#C000
-4 52428 16#CCCC
-3 55705 16#D999
-2 58982 16#E666
-1 62244 16#F324
0 0 0 0 0
1 3276 16#0CCC 6553 16#1999
2 6553 16#1999 13107 16#3332
3 9830 16#2666 19660 16#4CCC
4 13106 16#3332 26214 16#6665
5 16383 16#3FFF 32767 16#7FFF
6 19660 16#4CCC 39320 16#9998
7 22936 16#5998 45874 16#B332
8 26213 16#6665 52427 16#CCCB
9 29490 16#7332 58981 16#E665
10 32767 16#7FFF 65534 16#FFFE