Parker PAC, Installation Manual, Page: 142 / 197

PACIO MODULES
142 Parker Automation Controller Installation Guide
10. Right click on the ProfiBus network and insert the loaded GSD file.
11. Double-click and configure the ProfiBus node of this component to be station # 3.
12. In the right pane expand the ProfiBus Module to display the 16 Byte Data In/Out branch and add this to
the project.
13. Configure as shown below:
14. Create a Variable Table and reference the following variables:
15. Save the project and download it to the processor.
PAC Software
1. In this example, PAC has been configured with the device as shown. You
will now add the following program code to the project and reference it with an associated task: