Parker PAC, Installation Manual, Page: 125 / 197

The current set values can be read in the variable "SelectedValue" from the
group. Use the variable "Select_1",to determine which value you want to see in the variable
"SelectedValue"(see section Counter Actual Values ).
Variable Data type Explanation
Select_1 UINT
Sets the value displayed in the variable "SelectedValue_1":
0
none
1 Compare value
2 Preset value
3 Max value
4 Hardware Captured value
5 Counter pulses/second
6 Revolutions per minute
128 Version info
SetValue_1 DINT
Value to be set (when using SetCounter_1, SetCompare_1,
SetPreset_1, or SetMax_1
Counter Actual Values
These variables display the current counter value and the current set values. The set values are
represented in the variable "SelectedValue_1" (Determined by Select_1).
Variable Data type Explanation
Counter_1 DINT Current value of counter 1
Selected_1 UINT
Selection of the value displayed in the variable
SelectedValue_1.
(Value of Select_1 read from the Module)
0
none
1 Compare value
2 Preset value
3 Max value
4 Captured value
5 Counter pulses/second
6 Revolutions per minute
128 Version info
SelectedValue DINT Selected current value of counter 1
Version information:
Byte 3 2 1 0
Explanation Version # Release Level Type code
Example
0x2 0x00 0x00 0x53
2 0 0 S