Parker PAC, Installation Manual, Page: 104 / 197

PACIO MODULES
104 Parker Automation Controller Installation Guide
mV Mode in µV resp. 2µV
Module Control
The PACIO AI8 Thermocouple 16 Bit Module provide you with various operational options. To set up the
Module, choose the options as appropriate and accept by setting control bit "SetOptions" to a rising edge.
The Modules will confirm by returning "OptionsSet".
There are various "Module error" bits that the Module uses to indicate errors. The states of the error bits
are retained and also used for error indication by the "IO" LED. To reset the error bits, set control bit
"ResetError" to a rising edge.
Variable Data type Explanation
SetOptions BOOL Rising edge

accepts Module options
ResetError BOOL Rising edge

acknowledges error
Module Options
The following options are available for the PACIO AI8 Thermocouple 16 Bit Module. To set and accept
Variable Data type Explanation
Channel_n_SensorType USINT
Sensor type
16#00 mV: not used
16#10 mV: -40 .. +65mV, values in 2µV
16#04 Type K: not used
16#14 Type K: -200°C .. +1372°C in 0.1°C
Channel_n_On BOOL Enables channel n
Channel_n_Filter USINT
Set filter for channel n.
The arithmetic mean is output after n+1 conversions
n 7 Channel number