Parker PAC, Installation Manual, Page: 65 / 197

4. Double-click PLC-PRG (PRG) in the tree.
5. Enter the following text into the Declarations section of this POU.
PROGRAM PLC_PRG
VAR
MyBoolTag : BOOL;
MyIntTag : INT;
MyStringTag : STRING;
END_VAR
6. Double-click on Symbol configuration to open the symbol configuration worksheet.
7.
8.
shown below. This will expose them for use with the Xpress HMI.
Note: In order to expose your tags to Xpress, you must check the box for each tag. Any POU, Global
Variable, or Persistent list in your PAC project can share tags with Xpress
9. Save the project.
10. Download your project to the PAC controller.
a. Double Click on Device (PAC320-XXX2X-XX) from the Devices tree.
b.