Parker PAC, Installation Manual, Page: 174 / 197

COMMUNICATIONS MODULES
174 Parker Automation Controller Installation Guide
5. Right-click in the ladder worksheet area and choose Insert Contact, select the above
the contact and then select the . Open the IODrvEthercatLib section of the menu and
choose SInBitA then close the menu.
6. Right-click on the rightmost rectangle to the right of the contact you entered and select Insert
Coil.
7. Select the above the coil, and expand the IoConfig_Globals_Mapping branch. Select
Word from the list.
8. Double-click the NetX_PN_Device portion of the tree.
9. Select the PNIO identification tab and enter the following values:
o
IP Address: 192.168.0.1
o
Subnet Mask: 255.255.255.0
o
Default Gateway: 0.0.0.0
o
Station Name: PAC
Siemens S7 Configuration
This section describes configuration of the Siemens S7 controller. This document uses the Siemens model
CPU315-2 PN/DP controller. Consult the appropriate documentation for communication with other
controllers.
1. Open Simatic Manager.
2. Select File/New.
3. .
4. Click OK.
5. Right-click in right window and click .
6. Click Simatic .
7. Double-click Hardware .
8. Right-click in left window and choose , choose Simatic 300, Rack 300, Rail
9. Select PS 307 5A.
10. Open Simatic 300 branch.
11. Open CPU 315-2 PN/DP.
12. Open 6ES7-315 2Eh13-0AB0.
13. Drag this to Slot 2.
14. Set the IP to 192.168.0.66.
15. Set the Mask to 255.255.255.0.
16. Click OK.