Parker PAC, Installation Manual, Page: 31 / 197

To Remove a PACIO Module from the PAC Controller
1. Press the Unlock Button on the PACIO Module that needs to be removed, and slide all modules
about 2 cm to the right.
2. Push the Unlock Button on the adjacent Module to the right of the Module to be removed and slide
the Module that needs to be removed to the left, just enough to clear the E-Bus connector on the
right Module.
3. Push the Module up and against the metal spring located on the underside of the rail guide.
4. Tip the Module away from the rail as shown in the illustration.
5. Pull the Module down and out of the mounting rail.