Parker PAC, Installation Manual, Page: 5 / 197

Regulatory Statements
Statement of Compliance
Product Type Parker Automation Controller (PAC), PACIO Modules and accessories
The PAC Controller complies with the protection requirements set up by the European Community (EC)
Electromagnetic Compatibility (EMC) Directive 2004/108/EC as defined by the Product Specific Standard
EN/IEC 61326-1, which includes both emissions and immunity requirements and the power line emissions
standards EN/IEC 61000-3-2, Limits for Harmonic Current Emissions and EN/IEC 61000-3-3, Limits of
Voltage Fluctuations and Flicker in Low Voltage designated for Equipment used in Industrial Locations.
Compliance of the PAC Controller is demonstrated by the application of the following standards:

2006/95/EC Low Voltage Directive when installed, operated, and maintained as intended

2004/108/EC Electromagnetic Compatibility when installed, operated, and maintained as intended

EN61010-1 Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory use, Part 1 General Requirements

EN61010-2-201:2013 Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory use Part 2-201: Particular Requirements for Control Equipment
The PACIO Modules and accessories are sold as complex components to professional assemblers. The
Parker Installation Guidelines described in this document offer information regarding how to install the
PAC in a manner most likely to minimize the effects of drive emissions and to maximize the immunity of
the PAC from externally generated interference. Compliance of the PACIO Modules is demonstrated by the
application of the following standard:

2004/108/EC Electromagnetic Compatibility when installed, operated, and maintained as intended.
In order to comply with the EMC Directive for installation, the PAC system must meet the following
criteria:

The PAC must be mounted in a suitable tool-accessed fire enclosure.

PAC input power is rated at: 24 VDC (-15%/+25%) SELV Limited Energy, 1.2 A, 29W. External power
to the PAC must be provided by a Class 2 power source. For customer convenience, Parker offers
an AC-input, Model PS-60W, Class 2, 24VDC power supply, which is available for purchase, to
provide power to the PAC and PACIO Modules.