4-34
Installation
AC30V Variable Speed Drive
Getting Started
GKP SETUP WIZARD
Purpose of the Setup Wizard
The purpose of the setup wizard is to configure the drive in a clear and concise manner.
First familiarize yourself with Chapter 7 Graphical Keypad, for the keypad functions.
Starting the Setup Wizard
The Setup Wizard is automatically invoked when the drive is reset to factory default settings. The setup wizard
may be invoked at any other time by navigating to the Welcome Screen at the “top” of the menu tree the
pressing the
key, Soft Key 1.
Running the Setup Wizard
At each point in the wizard pressing the OK key selects the displayed value and moves on to the next step.
Pressing
Soft Key 1
moves back a step. Pressing the UP and DOWN keys modifies the selected value.
Setup Wizard Stages
After selecting the required view level and language, the next option is “Set Factory Defaults”. Changing this parameter to TRUE then pressing
OK resets all parameters back to the default value determined by the AC30V’s hardware configuration. If this choice is left FALSE the setup
wizard starts with all parameters with their previously set values. Accepting each choice without change by pressing OK will result in no change to
the drive’s configuration.
The rest of the Setup Wizard consists of a several sections. Each section corresponds to a functional component of the drive, for example:
Application selection
IO Option, (includes the Encoder)
Analog input and output ranges.
Motor Data
Motor Control
Fieldbus options
On-board Ethernet
Auto tune
If not required, any section may be skipped.
The default setting for all parameters depends on earlier answers and on the physical configuration of the drive. All data entered is automatically
saved without the need for any additional commands.
Finalising Setup
Once the Setup Wizard has been run to completion the feature is automatically disabled. Re-starting the drive will not cause the Setup Wizard to
be run again. (If it is desired to re-run the Setup Wizard, this can be achieved as detailed above in “Starting the Setup Wizard”).
For complete details go to “Chapter 9 Setup Wizards”.
OK key
Soft Key 1
