Parker AC30V Series, Product Manual

Page: 291 / 414

Parameter Reference
D-52
AC30V series Variable Speed Drive
IO Configure
Setup::Inputs and Outputs
Parameters::Inputs And Outputs::IO Configure
These parameters are used to configure the input signal processing.
PNO Parameter Descriptions
0001
Anin 01 Type
Analog input 1 is associated with terminal X11.1
The signal processing electronics for analog input 1 supports four input ranges:
0. -10..10V
1. 0..10V
2. 0..20MA
3. 4..20MA
0957
Anin 01 Offset
The offset is expressed as a percentage of the hardware range selected by 0001 Anin 01 Type . For example, with the 4..20mA
range an offset of 10% is equivalent to 1.6mA on the input.
The offset is added to the measured value.
0958
Anin 01 Scale
The scale is a simple multiplication factor. The input voltage or current is converted to a percentage value. 0957 Anin 01 Offset is
added and the result is multiplied by 0958 Anin 01 Scale . The result is presented in parameter 0039 Anin 01 Value .
0002
Anin 02 Type
Analog input 2 is associated with terminal X11.2
The signal processing electronics for analog input 2 supports two input ranges:
0. -10..10V
1. 0..10V
0959
Anin 02 Offset
The offset is expressed as a percentage of the hardware range selected by 0002 Anin 02 Type . For example, with the -10..10V
range an offset of 10% is equivalent to 1v on the input.
The offset is added to the measured value.
0960
Anin 02 Scale
The scale is a simple multiplication factor. The input voltage is converted to a percentage value.
0959 Anin 02 Offset
is added and
the result is multiplied by 0960 Anin 02 Scale . The result is presented in parameter 0041 Anin 02 Value .