Fire Mode
13-5
AC30V series Variable Speed Drive
If a trip source becomes active when the associated trip is disabled the drive will continue to run. This is also the normal behavior of the drive,
(when Fire Mode is not active). If the associated trip is designed for drive protection, this will be recorded in non-volatile memory. The recorded
values are available to view in the Trips History parameter block, (refer to Appendix D).
When Fire Mode is activated and a trip source becomes active and the associated trip is enabled, the drive will trip, causing the motor to stop.
This is similar to the normal behavior of the drive, (when Fire Mode is not active). However, when Fire Mode is active the drive firmware
continues to monitor the trip source, once the trip source has become inactive the drive automatically resets the trip condition and restarts the
drive.
The Fly catching feature can be used to allow the drive to smoothly resume control of a moving load on restart.
MOTOR CONTROL MODES
The operation of Fire Mode is independent of the motor type motor and the control mode, (Open Loop or Sensorless Vector control).
