C-27
Compliance
AC30V series Variable Speed Drive
Frame K:
To access the filter disconnect, first remove the VCM, refer to Chapter 4 for removal instructions. Remove the main cover by unscrewing its 4
fixings (shown on page 4-2), you can then remove the link connection as highlighted below.
The main cover fixings should only be removed once the supply has been disconnected and the residual
energy has been discharged.
“DANGER” – Risk of electric shock. Cover and cover screws must remain in place while drive is energised”,
the EMC filter disconnect will become live once cover and cover screws are removed.
