Parameter Reference
D-30
AC30V series Variable Speed Drive
PNO Parameter Descriptions
Comms Option Pcode
The product code string that may be used to order an equivalent Communications Option, (only visible when a Communications
Option is selected).
Comms Option Serial
The serial number of the fitted Communications Option, (only visible when a Communications Option is selected).
IO Option Pcode
The product code string that may be used to order an equivalent IO Option, (only visible when an IO Option is selected).
IO Option Serial No
The serial number of the fitted IO Option, (only visible when an IO Option is selected).
IO Option SW Version
For intellilgent IO options this parameter shows the version of the firmware running in the option.
Drive Diagnostic
Indicates the health of the drive configuration. When the drive configuration includes a mutually conflicting requirement, this
parameter indicates the problem; for example, it attempting to run in Closed Loop Vector control mode when no feedback option is
configured.
Product Code Flags
Manufacturing flags byte read from the power electronics stack.
Bit 0
When set, indicates that the dynamic brake switch power electronics is fitted. On larger frame sizes the brake switch is
a factory fit option. On frames C,D,E,F and G this bit is ignored.
Bit 1 – 7
Reserved
Manufacturing Flags
Manufacturing flags word read from the control module.
Bit 0
When set, indicates that the drive is a special build.
Bits 1 – 15 Reserved
