D-107
Parameter Reference
AC30V series Variable Speed Drive
Spd Loop Diagnostics
Parameters::Motor Control::Spd Loop Diagnostics
Refer to the diagram in
Spd Loop
Settings
function.
Only applies to SVC control mode, IM or PMAC.
PNO Parameter Descriptions
Total Spd Demand RPM
This diagnostic shows the final values of the speed demand in rpm obtained after summing all sources. This is the value which is
presented to the speed loop
Total Spd Demand %
This diagnostic shows the final values of the speed demand as a % of
100% Speed in RPM
of the
Scale Setpoint
obtained after
summing all sources. This is the value which is presented to the speed loop.
Speed Loop Error
This diagnostic shows the difference between the total speed demand and the speed feedback
Speed PI Output
This diagnostic shows the torque demand due to the speed loop PI output, not including any feedforward terms.
