Panasonic VF200 Instruction Manual Download Page 215

Page: 215 / 289

Appendix Function Parameter List

208

P071

P075

P072

P076

P073

P077

P074

The 1

Speed Runtime

The 2

Speed Runtime

The 3

Speed Runtime

The 4

Speed Runtime

P078

The 5

Speed Runtime

The 6

Speed Runtime

The 7

Speed Runtime

The 8

Speed Runtime

Runtime at the 1

to 8

speed frequency can be set when the setting is “3” or

“4” in “P045: Multi Speed Function Select”.

Data setting range (s) 0000

0.1 to 6553

Increment (s)

0.1(0.1 to 999.9),

1(1000 to 3600)

* “0000” indicates that no operation will be performed at the set speed.

・

Each function is valid only when the setting is “3” to “4” in “P045: Multi Speed

Function Select”.

・

The inverter will not operate at the set speed when the setting is “0000”.

Multi-speed operation using timer will be performed only at the speed for which

time is set with P071 to P078.

If data is changed during operation, the data will become valid only after the

next cycle arrives.

Related parameters: P045 to P052, P061 to P070

Summary of Contents for VF200


































































































































































































































































































Search results

Summary of Contents for VF200

Reviews:

Related manuals for VF200

Brands by name

Popular brands

Panasonic VF200, Instruction Manual

Search results

Summary of Contents for VF200

Reviews:

Related manuals for VF200

Brands by name

Popular brands