Panasonic VF200, Instruction Manual

Page: 105 / 289

7. Custom Mode
98
7.2 Setting and Changing Parameters
The section describes the method of setting, changing and confirming function
parameters allocated to custom parameter No. For function parameters that
can be changed during operation, refer to items in “Changeable during
Operation” of “6.2 Function Parameter List”.
If data is changed during operation, the motor and motor
load may suddenly start/stop for the great fluctuation.
(Please take measures to ensure personal safety.)
Failure to do so may result in injury.
■
Setting Example
Change the setting of parameter “P002” (The 1
st
Deceleration Time) allocated
to custom parameter “U001” from “5.0” to “10.0”
1. Confirm operation status (i.e., stop status or
operation status) (For operation at 50.0 Hz).
2. Press button four times to select Custom Mode.
3. Press button to confirm the current allocated parameter
No.
*When function parameter No. in custom mode is
displayed, a dot will appear behind the letter “P” (i.e., “P.”).
(If a password is set beforehand, please enter it. Refer to
parameter P150. )
4. Press button to display setting value of parameter
P008. (The display part is flickering.)
5. Press button to change the displayed value to “10.0”.
(The display part is flickering.)