Panasonic VF200, Instruction Manual

Page: 213 / 289

Appendix Function Parameter List
20
6
P068 Continuous Operation Times of Timer
Continuous operation times of timer in one cycle can be set by using the 1
st
to
8
th
speed operation as “timer operation cycle” when the setting is “3” to “6” in
“P045: Multi Speed Function Select”.
Data setting range
(times)
0000
·
1 to 9999
* “0000” indicates that there is no limit to operation times. After run command
is input, the operation will keep on until stop command is input.
・
This function is valid only when the setting is “3” to “6” in “P045: Multi-Speed
Function Select”.
・
If data is changed during operation, the data will become valid only after the
next cycle arrives.
Related parameters: P045, P069 to P070
P069
P070
Continuous Operation Mode of Timer
Continuous Waiting Time of Timer Operation
Operation mode and continuous waiting time of timer operation from the end
of the 1
st
cycle to the 2
nd
cycle can be set when the setting is “3” to “6” in
“P045: Multi Speed Function Select”.
If continuous operation mode of timer is set to “1”, continuous waiting time of
timer operation will become invalid.