Panasonic VF200, Instruction Manual

Page: 82 / 289

5. Control Status Monitor
7
5
n011 Operation Status Monitor
For displaying operation status of inverter. Each LED segment lights up and out
depending on details shown in the following table.
Normally, segment i to I light up.
LED segment indication
Monitor
No.
Operation status
Details of lighting up Details of lighting out
Run Stop
Operation status
“a” lights up “a” lights out
Reverse run Stop or forward run
Reverse run status
“b” lights up “b” lights out
ON OFF
Arrival signal
“c” lights up “c” lights out
ON OFF
Overload signal
“d” lights up “d” lights out
ON OFF
Frequency detection
(parameter P093)
“e” lights up “e” lights out
ON OFF
Frequency detection
(parameter P094)
“f” lights up “f” lights out
ON OFF
Current signal detect
(upper limit)
“g” lights up “g” lights out
ON OFF
Current signal detection
(lower limit)
“h” lights up “h” lights out
PID automatic tuning status Normal operation status
PID automatic tuning
function
“a1” lights up “a1” lights out
Timer operation status Normal operation status
Timer operation
function
“b1” lights up “b1” lights out
Motor constant automatic
tuning status
Normal operation status
Motor constant
automatic tuning
function
“c1” lights up “c1” lights out
Abnormal Normal
Abnormality status
“d1” lights up “d1” lights out
Speed search status Normal operation status
Speed search function
“e1” lights up “e1” lights out
Winding mode control status Normal operation status
n011
Winding mode control
“f1” lights up “f1” lights out