Panasonic VF200 Instruction Manual Download Page 214

Page: 214 / 289

Appendix Function Parameter List

207

■

Parameter P069: Continuous Operation Mode of Timer

Setting value

Details

After one cycle of operation, the operation returns to the 0 V stop

status within the 1

deceleration time and enters the next cycle.

After one cycle of operation, the operating frequency will change to

the 1

speed frequency of the next cycle within the 1

deceleration

time.

■

Parameter P070: Continuous Waiting Time of Timer Operation

Data setting range (s) 0000

0.1 to 6553

Increment (s)

0.1 (0.1 to 999.9),

1 (1000 to 6553)

* “0000” indicates that there is no waiting time.

If data is changed during operation, the data will become valid only after the

next cycle arrives.

・

If data is changed during waiting time, the data will become valid only after

the next cycle arrives.

Related parameters: P002, P045 to P052, P061 to P068

Summary of Contents for VF200


































































































































































































































































































Search results

Summary of Contents for VF200

Reviews:

Related manuals for VF200

Brands by name

Popular brands

Panasonic VF200, Instruction Manual

Search results

Summary of Contents for VF200

Reviews:

Related manuals for VF200

Brands by name

Popular brands