Panasonic VF200, Instruction Manual

Page: 222 / 289

Appendix Function Parameter List
21
5
9
r9
After one cycle of
timer operation
When one cycle of timer
operation completes (output is
available only during waiting
time).
10
r10
Timer operation
completed
When timer operation completes
(with “tEnd” displayed).
11
r11 Alarm
Output is available with alarm
LED flickering.
12
r12
Speed search
operation signal
When speed search starts, the
open-collector output is ON;
when the speed search
completes, the open-collector
output is OFF.
・
The setting value “5” and “6” are used to set delay time of current detection
signal with “P096: Current Sensing Delay Time”.
・
The setting value “10” is used to output the time set with “P070: Continuous
Waiting Time of Timer Operation”.
Related parameters: P070, P094 to P096