Panasonic VF200, Instruction Manual

Page: 83 / 289

5. Control Status Monitor
7
6
n012
Operation Control Status Monitor
For displaying operation control status of inverter. Each LED segment lights up
and out depending on details shown in the following table. Normally, segment i
to I light up.
When command status is "Timer in Operation" and parameter P45
(Multi-speed Function Setting) is set to “3” or “4”, relevant segment lights up if
operation command is input.
When command status is “Pulse Input in Operation” and parameter P45
(Multi-speed Function Setting) is set to “5” or “6”, relevant segment lights up if
operation command is input.
LED segment indication
Monitor
No.
Command
status
1: with command 0: without command
Run command
status
“a” lights up “a” lights out
Reverse run
command status
“b” lights up “b” lights out
SW1 command
status
“c” lights up “c” lights out
SW2 command
status
“d” lights up “d” lights out
SW3 command
status
“e” lights up “e” lights out
SW4 command
status
“f” lights up “f” lights out
SW5 command
status
“g” lights up “g” lights out
Timer in
operation
“h” lights up “h” lights out
n012
Pulse input in
operation
“a1” lights up “a1” lights out