Otto Bock 1C66 Triton, Instructions For Use Manual

Page: 20 / 222

20
The mode for orthopaedic technicians can be activated after installation by entering the activation
code from this document.
►
Enter one of the search terms in Google Play or the Apple App Store: Ottobock, Triton
smart ankle, Galileo
1.2 Combination possibilities
This prosthetic component is part of the Ottobock modular system and can be combined with oth­
er products of this modular system.
Designation Reference number
Prosthetic knee joint 3B1*, 3B5*, 3C98*, 3C88*, 3C96-1, 3C86-1
2 Intended use
2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
m°
kg
The product is recommended for mobility grade 2 (restricted outdoor walker) and
mobility grade 3 (unrestricted outdoor walker). Approved for a body weight of up
to
100 kg (220 lbs) .
•
TT prostheses:
The product is designed for use by unilateral or bilateral amputees.
•
TF prostheses and knee disarticulation prostheses:
The product is designed only for use
by unilateral amputees.
2.3 Environmental conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Relative humidity: 15% to 93%, non-condensing
Air pressure: 700 hPa to 1060 hPa
Storage and transport temperature range:−25 °C to +65 °C
Moisture: fresh water as splashing water
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, salt water, acids
Sand, highly hygroscopic particles (e.g. talcum)
2.4 Service Life
1C66 Triton smart ankle
This product has been tested by the manufacturer with 2 million load cycles according to ISO
22675. Depending on the patient's activity level, this corresponds to a service life of 2 to 3 years.
2Z504=1, 2Z505=1 ankle cover and connection cap
The product is a wear part, which means it is subject to normal wear and tear.